Skip to content
AfriScienceGroup home
Mining and Minerals

Shaft Systems, Winders and Vertical Transport

A shaft is the only way people and rock leave a deep mine, which makes the winder the single item of equipment whose failure stops everything and whose malfunction kills. This course covers operating and maintaining that system. Delegates work through shaft layout, equipping and steelwork, winder types and their drive and control systems, and rope selection, care and the statutory examination regime. Braking systems and safety devices are covered in detail, including the interlocks that prevent overwind. Conveyance operation, signalling and man winding procedures follow. The course closes on inspection, condition monitoring and the emergency procedures for a shaft incident.

Course objectives

  • Describe shaft layout, equipping and steelwork
  • Explain winder types and their drive and control systems
  • Select, care for and statutorily examine winding ropes
  • Maintain braking systems, safety devices and overwind protection
  • Operate conveyances, signalling and man winding procedures
  • Run inspection and condition monitoring on shaft systems
  • Execute emergency procedures for a shaft incident

Who should attend

  • Winding engine drivers and shaft supervisors
  • Mechanical and electrical engineers on shaft systems
  • Mine engineering and maintenance staff
  • Safety officers responsible for vertical transport
  • Shaft inspectors and technical auditors

Course outline

  1. 01The one system whose failure stops everything
  2. 02Shaft layout, equipping and steelwork
  3. 03Winder types, drives and controls
  4. 04Rope selection, care and statutory examination
  5. 05Braking systems and safety devices
  6. 06Overwind protection and interlocks
  7. 07Conveyances, signalling and man winding
  8. 08Inspection, monitoring and emergency response

Scheduled sessions

Scheduled sessions for Shaft Systems, Winders and Vertical Transport
DatesVenueFormatPriceRegister
28 September to 2 October 2026Addis Ababa, EthiopiaClassroomUSD 1,325 per delegateRegister Now
26 to 30 October 2026Dar es Salaam, TanzaniaClassroomUSD 1,325 per delegateRegister Now
9 to 13 November 2026OnlineOnlineR8,500 per delegateRegister Now
11 to 15 January 2027Gaborone, BotswanaClassroomR19,950 per delegateRegister Now
8 to 12 February 2027Johannesburg, South AfricaClassroomR19,950 per delegateRegister Now

Shaft Systems, Winders and Vertical Transport

From R8,500

AskRegister