Skip to content
AfriScienceGroup home
Power and Electrical

Oil and Gas Electrical and Instrumentation Engineering

Electrical and instrumentation work on oil and gas facilities carries constraints that do not apply elsewhere: classified areas everywhere, safety instrumented functions with integrity requirements, and the fact that an isolation error can release hydrocarbon. This course covers the discipline in that setting. Delegates work through power distribution on process facilities, hazardous area equipment selection and installation, and instrumentation for the process measurements that matter. Safety instrumented systems and their integrity requirements are covered, along with fire and gas detection. The course closes on inspection, maintenance and the permit and isolation regime that governs all of it.

Course objectives

  • Design power distribution for a process facility
  • Select and install equipment for classified areas
  • Specify instrumentation for the critical process measurements
  • Apply safety instrumented system requirements and integrity levels
  • Design and maintain fire and gas detection
  • Plan inspection and maintenance in a hydrocarbon environment
  • Work within the permit and isolation regime

Who should attend

  • Electrical and instrumentation engineers in oil and gas
  • Maintenance and inspection staff on process facilities
  • Project and commissioning engineers
  • Process safety professionals
  • Contractors working on hydrocarbon facilities

Course outline

  1. 01What makes this setting different
  2. 02Power distribution on a process facility
  3. 03Hazardous area equipment selection and installation
  4. 04Process instrumentation and critical measurements
  5. 05Safety instrumented systems and integrity levels
  6. 06Fire and gas detection
  7. 07Inspection and maintenance regimes
  8. 08Permits, isolation and the hydrocarbon risk

Scheduled sessions

Scheduled sessions for Oil and Gas Electrical and Instrumentation Engineering
DatesVenueFormatPriceRegister
28 September to 2 October 2026Johannesburg, South AfricaClassroomR19,950 per delegateRegister Now
5 to 9 October 2026Dar es Salaam, TanzaniaClassroomUSD 1,325 per delegateRegister Now
2 to 6 November 2026OnlineOnlineR8,500 per delegateRegister Now
7 to 11 December 2026Kigali, RwandaClassroomUSD 1,325 per delegateRegister Now
8 to 12 February 2027Casablanca, MoroccoClassroomUSD 1,325 per delegateRegister Now
1 to 5 March 2027Pretoria, South AfricaClassroomR19,950 per delegateRegister Now

Oil and Gas Electrical and Instrumentation Engineering

From R8,500

AskRegister