Skip to content
AfriScienceGroup home
Maintenance Management

Lubrication Management and Oil Analysis

A large share of rotating equipment failures trace back to lubrication that was wrong, contaminated or simply absent, and lubrication is usually the least supervised task on a maintenance schedule. This course gives it the attention it earns. Delegates work through lubricant types and selection, viscosity and additive function, and the contamination control that determines oil life far more than time in service does. Storage, handling and dispensing are covered, since most contamination is introduced by the people topping up. Oil analysis follows: sampling technique, the tests available and what each reveals, and trending results into a decision. The course closes on grease application, on relubrication intervals and on building a lubrication programme.

Course objectives

  • Select lubricants by viscosity, additive function and application
  • Control contamination through filtration and exclusion
  • Store, handle and dispense lubricants without introducing contamination
  • Take a representative oil sample
  • Interpret oil analysis tests and what each reveals
  • Trend results into a maintenance decision
  • Set relubrication intervals and build a lubrication programme

Who should attend

  • Maintenance technicians and lubrication staff
  • Reliability and condition monitoring engineers
  • Maintenance planners and supervisors
  • Laboratory staff running oil analysis
  • Stores staff handling lubricants

Course outline

  1. 01The least supervised task on the schedule
  2. 02Lubricant types and selection
  3. 03Viscosity and additives
  4. 04Contamination control and oil life
  5. 05Storage, handling and dispensing
  6. 06Sampling technique
  7. 07Oil analysis tests and interpretation
  8. 08Trending, grease, intervals and programme design

Scheduled sessions

Scheduled sessions for Lubrication Management and Oil Analysis
DatesVenueFormatPriceRegister
25 to 27 November 2026Harare, ZimbabweClassroomUSD 995 per delegateRegister Now
1 to 3 February 2027OnlineOnlineR6,500 per delegateRegister Now
17 to 19 February 2027Cape Town, South AfricaClassroomR14,950 per delegateRegister Now

Lubrication Management and Oil Analysis

From R6,500

AskRegister